Supported doors
-
Door thicknesses: up to 110mm for a symmetric door, or up to 55mm measured from the cylinder screw.
-
The most common center-to-center distances: PC 55, 72, 92 and 110 mm.
-
Any backset larger than or equal to 30 mm.
-
Anti plug pulling door hardware covering the cylinder.
-
Multi-point door locks – whether they have three, five or seven bolts.
-
Handle operated doors, where the handle needs to be lifted to lock the door. You still have to manually lift the handle upward after closing the door.
-
Door locks where the lock cylinder is above the handle.
Not supported doors
-
Sliding doors that have a extra long handle on the inside.
-
Doors where both sides are exposed to the weather or very low temperatures. This is generally the case for gates and unheated sheds. Only the outside module is fully waterproof.
-
Doors with rim locks, as these have a different cylinder profile. We recommend changing these locks for a SKG certified multi-point Euro profile lock.
-
Locks where you need to turn the key, lift the handle, and turn the key again. These locks are very rare.
All dimensions
-
Outside module: 51mm * 33mm * 8mm
-
Inside module: 284mm * 60mm * 29mm without knob and handle, 284mm * 60mm * 69mm with knob and handle
