Professional 2-channel DIN rail Z-Wave® smart switch with power metering
Suitable for home and facility automation with remote control. DIN-rail mountable inside a breaker box. Enhanced safety features.
- 2 outputs, 16 A each. Total device maximum of 25 A.
- Power metering on each channel separately and together
- DIN-rail mountable
- 1-phase control
- Extremely low power consumption: < 0.3 W
- Z-Wave frequency band: 868.4 MHz (CEPT countries)
- Latest technology: Z-Wave 800 Series
- Automatic set-up with SmartStart
- Security 2 Authenticated for the highest level of security
- Over-the-air firmware updates
- Works with Z-Wave-certified gateways and over 4,000 Z-Wave devices
*A gateway (smart hub) is not included. A gateway (smart hub) is required for the configuration of the device.
introduction to z-wave
Works with any Z-Wave gateway
Wave Pro Series is designed to be installed on the DIN-rail inside the breaker box. Once installed, include it in your Z-Wave network (Z-Wave gateway is required) and control connected appliances from anywhere using your smartphone or tablet. Shelly Qubino devices work with over 4000 Z-Wave certified devices and gateways.
Include Wave Pro 2PM to your Z-Wave network and control it remotely. It‘s compatible with all certified Z-Wave gateways.
Wave Pro 2PM has a total device output of 25 A.
Wave Pro 2PM provides precise monitoring of the power consumption on each channel (W) or together (W, kWh).
Use it to control a wide range of AC devices and appliances.
Establish direct communication between devices in your Z-Wave local network and set actions with no hub present!
Include the device as Security 2 Authenticated for encrypted communication and utmost safety of your Z-Wave network.
Endless use applications
Automate your lights and optimize their energy consumption through smart schedules, scenes, actions, etc. Wave Pro 2PM allows you to automate the lights on each floor separately and set custom schedules for each of them. Set all lights in the office to switch off when everyone has left the premises and never worry about wasting energy during non-working hours.
Automate the conference rooms so that they are fully ready for your business meetings. Establish a local (direct) communication between Z-Wave devices within your network and execute actions without Z-Wave gateway. The motion sensor* will trigger the Wave Pro 2PM to turn on the lights and the projector, so the conference room is instantly ready for your presentation!
*Any Z-Wave motion or door sensor can be used with Wave Pro 2PM
Keep an eye on real-time consumption of appliances and stop unnecessary energy usage in the office over the weekend! With Wave Pro 2PM you can precisely measure power consumption for each channel separately (W) and together (W, kWh). There are many appliances that employees forget to turn off when leaving the office on Friday, such as monitors, plugged chargers, desk lights, or printers, unnecessarily burdening the monthly bills. Use smart schedules to cut off the power supply of the office appliances over the weekend and to restore it before the employees arrive at the office.
When an electrical appliance is damaged, it doesn't simply stop working. Usually, it increases the amount of energy used in an attempt to compensate for its operational capacity. Since there is no visible difference in its performance, it might take months before you can identify a problem, leading to inefficiency and wasted energy. Wave Pro 2PM, however, will immediately report the increase in energy consumption and will save you additional expenses on repairs or replacement of equipment.
Enhanced with temperature, overpower, and overvoltage* load protection, Wave Pro series is designed to be installed inside the breaker box (DIN). Allowing full smart automation with no additional cables or wiring, Pro line is perfect for homes, offices, stores, business, and manufacturing facilities, as well as new buildings.
*Overpower and overvoltage features are available only for power metering-enabled devices
|110-240 V AC, 50/60 Hz
|< 0.3 W
|Power measurement (W)
|Max. switching voltage AC
|Max. switching current AC
|16 A per channel, 25 A total
|Max. switching voltage DC
|Max. switching current DC
|Up to 40 m indoors (131 ft.) (depends on local condition)
|Z-Wave frequency bands
|Maximum radio frequency power transmitted in frequency band(s)
|< 25 mW
|Size (H x W x D)
|94x19x69 ±0.5 mm / 3.70x0.75x2.71 ±0.02 in
|75 g / 2.65 oz.
|Screw terminals max. Torque
|0.4 Nm / 3.54 lbin
|Conductor cross section
|0.5 to 2.5 mm² / 20 to 14 AWG (green connectors) 0.5 to 1.5 mm²/ 20 to 16 AWG (white connectors)
|Conductor stripped length
|6 to 7 mm² / 0.24 to 0.28 in (green connectors) 5 to 6 mm / 0.20 to 0.24 in (white connectors)
|-20°C to 40°C / -5°F to 105°F
|30 % to 70 % RH
|2000 m / 6562 ft.