Shelly Blu Door Window Zb

Shelly BLU Door/Window ZB
ShellyBLU-Door Window ZB white.jpg

  • Device name: Shelly BLU Door/Window ZB

  • Device model: SBDW-103C

  • Device Bluetooth ID: 0x0014

Shelly BLU Door/Window ZB (the Device) is a Bluetooth sensor designed to detect the opening and closing of a door or a window. It can also measure the tilt angle of a turn-and-tilt door or window. In addition, it features a light sensor.

Features

  • Long battery life

  • Door/window opening and closing detection

  • Door/window inclination angle measurement

  • Illumination measurement

  • Beacon mode

  • Encrypted mode

Main applications

  • Residential

  • MDU (Multi Dwelling Units - apartments, condominiums, hotels, etc.)

  • Light commercial (small office buildings, small retail/restaurant/gas station, etc.)

  • Government/municipal

  • University/college

Connectivity

  • Bluetooth

  • Zigbee

Modes of operation

  • Regular mode: The Device broadcasts the current open or closed state, illuminance, and battery status each time the open/closed state changes (door/window opened or closed). If a tilt-and-turn door or window is opened, the Device immediately broadcasts information about the event, the illumination, and the battery status at the time of detection. Two seconds later, it broadcasts tilt angle, illumination, and battery status. Every 8 seconds, the Device checks the tilt angle. If a change is detected, the Device broadcasts the updated angle.

  • Beacon mode: The Device broadcasts the current open and closed state, illuminance, and battery status every 30 seconds. You can enable Beacon mode in the settings in the Shelly Smart Control settings. For more details, visit the Shelly Smart Control guide.

The battery life may be significantly reduced when the Device is in Beacon mode.

User interfaces

One push button

  • Press 4 times quickly to put Shelly BLU Door/Window ZB into pairing mode. The LED flashes once every 2 seconds for 1 minute.

  • Press 5 times quickly to activate Zigbee pairing. The LED flashes twice every two seconds for 1 minute.

  • Press and hold for 30 sec to factory reset.

Specifications

Type

Value

Physical

Size (HxWxD):

  • 35x35x7 mm ±0.5 mm / 1.38х1.38х0.27 in ±0.02 in (Sensor unit)

  • 35x12x7 ±0.5 mm / 1.44х0.47х0.27 in ±0.02 in (Magnet)

Weight:

  • 10 g ±1 g / 0.35 ±0.05 oz (Device with the battery)

  • 8 g ±1 g / 0.28 ±0.05 oz (Magnet)

Shell material:

Plastic

Color:

White, black, brown

Environmental

Ambient temperature:

-20 °C to 40 °C / -5 °F to 105 °F

Humidity:

30 % to 70 % RH

Electrical

Power supply:

1x 3 V CR2032 battery (included)

Battery life:

5 years

Sensors

Reed switch

Yes

G-sensor

Yes

Light sensor

Yes

Radio

RF band:

2402 - 2480 MHz

Max. RF power:

<8 dBm

Bluetooth Protocol:

5 (LE)

Bluetooth Range:

Up to 10 m / 33 ft indoors and 30 m / 100 ft outdoors
(Depends on local conditions)

Zigbee

Protocol:

802.15.4

RF band:

2405 to 2480 MHz

Max. RF power:

< 8 dBm

Range:

Up to 10 m / 33 ft indoors and 30 m / 100 ft outdoors
(Depends on local conditions)

MCU

CPU:

EFR32MG27

Flash:

768 kB

Firmware capabilities

Schedules:

No

Webhooks (URL actions):

No

Scripting:

No

MQTT:

No

Encryption:

Yes

Other

Supported Devices

  • Shelly Plus / Gen3 / Gen4 series

  • Shelly Pro series

Components and APIs

Compliance

Battery material safety data sheet

CR-PSDS-01 Panasonic MSDS

Printed user guide

Installation guides