Remotely control a wide range of home appliances and office equipment from anywhere. Retrofit your standard electrical wall boxes, power sockets, and light switches or other places with limited space.
Remotely control a wide range of home appliances and office equipment from anywhere. Retrofit your standard electrical wall boxes, power sockets, and light switches or other places with limited space.
Remotely control a wide range of home appliances and office equipment from anywhere. Retrofit your standard electrical wall boxes, power sockets, and light switches or other places with limited space.
Remotely control a wide range of home appliances and office equipment from anywhere. Retrofit your standard electrical wall boxes, power sockets, and light switches or other places with limited space.
Remotely control a wide range of home appliances and office equipment from anywhere. Retrofit your standard electrical wall boxes, power sockets, and light switches or other places with limited space.
Surplus charging with a wallbox is worthwhile: you use self-generated solar power directly to charge your electric car - this reduces electricity costs, increases your own consumption and makes you less dependent on the grid.
An external system, e.g. from Shelly, recognises when surplus solar power is available and gives the wallbox the signal to charge. The wallbox then automatically controls the charging power.
The electricity is not fed into the public grid, but used directly. This increases the proportion of self-consumption of the photovoltaic system, which is economically and ecologically advantageous. This is particularly worthwhile when electricity prices are rising. A smart solution for your wallet and the environment.
With surplus charging, you use the solar power that your home does not currently need to automatically charge your electric car using a wallbox and simple energy management system.
Assuming your electric car requires 15 kWh per charging process.
Feed-in tariff: approx. 8 cents/kWh Grid electricity price: approx. 30 cent/kWh
Feed-in tariff:
If you feed 15 kWh into the grid, you get: 15 kWh × € 0.08 = € 1.20
Electricity price from the grid:
If you draw the same amount from the grid, you pay: 15 kWh × € 0.30 = € 4.50
Savings: 4.50 € - 1.20 € = 3.30 € per charging session
With 100 charging sessions per year, you save approx. 330 € - just by wallbox surplus charging.
To retrofit existing PV systems for surplus charging, first install a Shelly Pro 3EM or Pro 3EM CT63 .
These devices recognise when there is a PV surplus and control the wallbox via a scene. Two scenes are required for reliable operation: one to switch on when there is a surplus and a second to switch off when the surplus is no longer sufficient. The switching threshold value can be set individually.
Depending on the wallbox model, you use the following for control:
Important: The wallbox must start automatically when power is applied.
A specialist company should carry out the planning and installation.
A photovoltaic system with an output of 10 kWp generates an average of 9,000 to 12,000 kWh of electricity per year in Germany, depending on location and orientation. You usually only use 25 to 35 per cent of this directly in your household.
The rest, around 6,000 to 9,000 kWh per year, is surplus that is fed into the grid. You currently get around 8 cent/kWh for this. Electricity from the grid, on the other hand, costs at least 30 cent/kWh.
This reduces electricity costs, increases the efficiency of your solar system and improves your personal carbon footprint - sustainably and measurably.
With solar charging, you charge your electric car directly with the electricity generated by your photovoltaic system. This allows you to actively utilise solar energy, reduce electricity costs and protect the environment at the same time.
You can use surplus solar energy to charge your electric car, heat water or for household appliances - completely automatically with a smart energy management system.
Yes - an intelligent control system recognises solar power and starts the charging process as soon as enough energy is available.
The easiest way to make your wallbox smart is with a Shelly 1PM. It controls a contactor - a powerful switch - and starts charging automatically when there is sufficient PV surplus
Shelly offers worldwide shipping, making our products accessible globally.
Get 3 years warranty on Shelly Plus, Wave, Gen3 and Gen4 devices; 5 years on Shelly Pro and Wave Pro devices and
2 years on all the rest.
Shelly Europe holds ISO 14001:2015, ISO 27001:2022, and ISO 9001:2015 certificates.
Proudly designed and developed in the EU.
Access expert tips and detailed guides in our Shelly Knowledge Base—your ultimate resource for maximizing your smart home setup.