(based on shipping country: Belgium)
Single wire WiFi-operated relay + Bypass
Convert any existing wall switch into a smart switch without changing the wiring or running new cables with Shelly 1L. The first device in the world that is able to automate even the appliances wired with no neutral present. Thanks to its small size and wide range of voltage support, it's a real innovation!
- has an embedded webserver
- is designed for installation in a limited space, such as wall switches
- can function as a standalone device, as an accessory to a home automation controller, or it may be used as another automation system's component
- temperature protection
Connect Shelly 1L to your Wi-Fi network. No HUB required!
Control your lights or other appliances only by Live wire.
No neutral is required.
Shelly 1L fits behind any existing wall switch.
Use it to control a wide range of devices and appliances.
Set custom schedules based on your daily agenda or follow the sunrise/sunset and execute pre-set actions accordingly.
Set custom scenes by combining Shelly 1L with
your other Shelly devices.
Lights control with no neutral
Shelly 1L is a Wi-Fi-operated smart relay that requires no neutral wire, making it suitable for all electrical installations! Easy to install in less than 10 minutes, Shelly 1L can grant you full control over your home lighting and help improve its efficiency. By using smart schedules and remote control, you can ensure that no lights are left switched on while you're away.
Many light switches are wired with no neutral present, which makes them difficult to automate. Shelly 1L can convert any existing wall switch into a smart switch. You don’t need to change the wiring, to fun new cables, or anything else - just put it behind an existing wall switch. There is no limit to the type of lights you can use with Shelly1L – LED, CFL, Incandescent, Halogen, or Luminescent lights can be controlled.
Shelly will set the lights on the porch to automatically switch on around the time you come home from work, and together with a motion sensor, never let you walk in a dark room again. And don’t worry – light switches can still be used manually to suit the needs of everyone in your home.
| Physical | |
|---|---|
| Size (HxWxD): | 38x43x14 ±0.5 mm / 1.50x1.69x3.55 ±0.02 in |
| Weight: | |
| Mounting: | Wall console |
| Screw terminals max torque: | 0.4 Nm / 3.5 lbin |
| Conductor cross section: | 0.5 to 1.5 mm² / 20 to 16 AWG |
| Conductor stripped length: | 5 to 6 mm / 0.20 to 0.24 in |
| Shell material: | Plastic |
| Color: | Cyan |
| Environmental | |
| Ambient temperature: | -20 °C to 40 °C / -5 °F to 105 °F |
| Humidity: | 30 % to 70 % RH |
| Max. altitude: | 2000 m / 6562 ft |
| Electrical | |
| Power supply AC: | 110 - 240V, 50/60Hz |
| Power supply DC: | No |
| Neutral not needed: | Yes |
| Min. load without neutral | 20 W resistive load |
| Power consumption: | < 1 W |
| Output circuits ratings | |
| Max switching voltage AC: | 250 V |
| Max switching voltage DC: | N/A |
| Max switching current AC: | 4.1 A (5 A peak) |
| Max switching current DC: | N/A |
| Sensors, meters | |
| Temperature sensor: | Yes |
| Radio | |
| RF band: | 2401 - 2495 MHz |
| Max. RF power: | <20 dBm |
| Wi-Fi protocol: | 802.11 b/g/n |
| Wi-Fi Range: | Up to 30 m / 100 ft indoors and 50 m / 160 ft outdoors (Depends on local conditions) |
| MCU | |
| CPU: | ESP8266 |
| Flash: | 2 MB |
| Firmware capabilities | |
| Schedules: | 18 |
| Webhooks (URL actions): | 10 with 5 URLs per hook |
| Scripting: | No |
| MQTT: | Yes |
| CoAP: | Yes |
