Zum Inhalt
Select your delivery location
Suggested countries:
English
Delivery Country:
Slovakia

No results

PRODUCTS
    USE CASES
      PAGES
        Show all results
        Shelly Qubino Wave Pro 2
        €79.08Inc. VAT

        (based on shipping country: Slovakia)

        Available

        Professional 2-channel DIN rail Z-Wave® smart switch with dry contacts

        Suitable for home and facility automation with remote control. DIN rail mountable inside a breaker box. Enhanced safety features.​

        1. ​2 outputs, 16 A each. Total device maximum of 25 A.​
        2. Potential-free contacts (dry contacts) ​
        3. DIN-rail mountable​
        4. 2-phase control​
        5. Extremely low power consumption: < 0.3 W​
        6. Z-Wave frequency band: 868.4 MHz (CEPT countries)​
        7. Latest technology: Z-Wave 800 Series​
        8. Automatic set-up with SmartStart 
        9. Security 2 Authenticated for the highest level of security​
        10. Over-the-air firmware updates​
        11. Works with Z-Wave-certified gateways and over 4,000 Z-Wave devices​

        *A gateway (smart hub) is not included. A gateway (smart hub) is required for the configuration of the device.​

        Shelly Qubino Wave Pro 2
        €79.08
        WHY WAVE PRO 2?
        The best solution for new 
        home 
        buildings and business 
        facilities

        Wave Pro 2 is a two-phase, 2-channel relay supporting up to 25 A for professional lights and appliance automation for residential or commercial use. It is equipped with potential-free outputs (dry contacts), offering high flexibility in voltage support and applications. Different types of actions, scenarios, and schedules can be set to sync your environment to your daily activities or business needs. ​

        introduction to z-wave

        Shelly Qubino works on Z-Wave

         By using Z-Wave, smart home products can seamlessly communicate with each other, regardless of their brand or platform, thanks to a centralized smart hub! Shelly Qubino devices work on the latest Z-Wave chip generation (S800), one of the most popular standardized technologies for smart homes in the world. 

        *Z-wave devices have specific requirements in order to function correctly, such as the necessity to use a supported Z-wave hub. 
        For more information, please visit the official Z-wave website: www.z-wave.com

        introduction to z-wave 

        Works with any Z-Wave gateway

        Wave Pro Series is designed to be installed on the DIN-rail inside the breaker box. Once installed, include it in your Z-Wave network (Z-Wave gateway is required) and control connected appliances from anywhere using your smartphone or tablet. Shelly Qubino devices work with over 4000 Z-Wave certified devices and gateways. 

        Functionalities
        Z-Wave operated

        Include Wave Pro 2 to your Z-Wave network and control it remotely. It‘s compatible with all certified Z-Wave gateways.

        outputs, 16 A each

        It has a total device output of 25 A.​

        Dry contacts

        Supporting low and high voltages, this device enables you to control a wide range of AC devices and appliances.​

        DIN-mountable 

        Intended to be installed inside the breaker box and designed to meet the global DIN rail standardization.​

        Associations 

        Establish direct communication between devices in your Z-Wave local network and set actions with no hub present! ​

        The highest level of 
        security

        Include the device as Security 2 Authenticated for encrypted communication and utmost safety of your Z-Wave network.​

        USE CASES

        Endless use applications

        Use cases
        Control lights on 2 phases

        Automate the lights and optimize their energy consumption through smart schedules, timers, scenarios, etc. Wave Pro 2 allows you to control the lights on 2 phases and manage them separately by setting custom schedules and smart timers. Set the lights on the operational floors to switch off completely after the working day is over and switch back on only where it is necessary at 7:00 in the morning. This way, you will not have to worry about any forgotten lights or efficiency.​

        use cases
        Automate your valves 

        Use Wave Pro 2 to control the motorized valves in your water distribution box and control heating, cooling, or any other motorized valve in your facility. This way, you can protect your premises from flooding and make your spending more efficient by setting the schedules, scenes, or associations. Smart schedules combined with Z-Wave temperature & humidity sensors* will provide dynamic control of the heating system for an optimal indoor climate.​

        ​*Any Z-Wave temperature & humidity sensor can be used with Wave Pro 2.​

        use cases
        Sockets automation for efficient energy usage

        Make sure that no energy goes to waste by automating the sockets' power supply with Wave Pro 2 and use the smart scheduling to cut off the power to all non-essential heavy consuming electrical appliances in offices between 7:00 PM and 7:00 AM during the weekdays and over the weekend. That way, you will cut the energy consumption of these devices in half, which will result in significant optimization of the monthly energy cost. ​

        Socket automation for efficient energy use Shelly Pro 1
        Wave Pro Series​ 

        Enhanced with temperature, overpower, and overvoltage* load protection, Wave Pro series is designed to be installed inside the breaker box (DIN). Allowing full smart automation with no additional cables or wiring, Pro line is perfect for homes, offices, stores, business, and manufacturing facilities, as well as new buildings.​ 

        *Overpower and overvoltage features are available only for power metering-enabled devices. 

        Safety features

        Specifications
        Power supply110-240 V AC, 50/60 Hz
        Power consumption< 0.3 W
        Max. switching voltage AC240 V
        Max. switching current AC16 A per channel, 25 A total
        Max. switching voltage DCN/A
        Max. switching current DCN/A
        Overheating protectionYes
        Power measurement (W)No
        DistanceUp to 40 m indoors (131 ft.) (depends on local condition)
        Z-Wave repeater:Yes
        CPUZ-Wave S800
        Z-Wave frequency bands868,4 MHz
        Maximum radio frequency power transmitted in frequency band(s)< 25 mW
        Size (H x W x D)94x19x69 ±0.5 mm / 3.70x0.75x2.71 ±0.02 in
        Weight?73 g / 2.58 oz.
        MountingDIN rail
        Screw terminals max. torque0.4 Nm / 3.54 lbin
        Conductor cross section0.5 to 2.5 mm / 20 to 14 AWG (green connectors) 0.5 to 1.5 mm / 20 to 16 AWG (white connectors)
        Conductor stripped length6 to 7 mm / 0.24 to 0.28 in (green connectors) 5 to 6 mm / 0.20 to 0.24 in (white connectors)
        Shell materialPlastic
        ColorGrey
        Ambient temperature-20°C to 40°C / -5°F to 105°F
        Humidity30 % to 70 % RH
        Max. altitude2000 m / 6562 ft.
        Product support
        Even the smartest minds need 
        a little guidance sometimes
        Customer Reviews
        0 Reviews
        Write your review
        First name *
        Last name *
        Email address *
        Rating *
        Review *